AMPOULE VIAL WASHING MACHINE

Product Details:

Automatic External ampoule Washing Machine: Model AEEW 250 is designed to wash the outer surface of round shaped ampoule (1 ml to 10 ml ampoule) This machine washes the outer sides of ampoule and eliminates the particles that are formed on the ampoule, which are previously filled and sealed.

ampoule external washer machine is for oncology ampoule external washer machine and aseptic processing lines, speed up to 250apm , ampoule surfaces involves the destruction or removal of any possible product residual so as to prevent them infecting the operators and cross contamination between containers and machine, as well.

From the infeed hopper the ampoule are fed into the External ampoule Washing Machine starwheel. The machine consists of starwheel on which the ampoule are properly fed and transported from in feed hopper for the washing operation. Two operations are carried out on this machine. First the ampoule are washed by water jet and then dried by air jet. On the sides of the conveyor a set of spray nozzles are fitted on each conveyor for water jet. One set of knifes blocks are provided on each conveyor for air jet The air is sprayed through this knifes.

The Knifes are fitted in a inclined manner which ensures that the air that is sprayed reaches each corner of the vial which are previously washed. After washing and drying the vials are guided to the outfeed trays. Before reaching the outfeed Trays a special arrangement is provided to dry the ampoule from the bottom side.

A set of syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of the vial resulting in the drying of the ampoule. This machine is completely operated by PLC. A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water & air and shows the indication with alarm in the PLC.

• Infeed hopper.
• Imported Gear Motor for main drive, 
• A.C. Frequency Drive for main drive, 
• “No Vial – No Washing” system.
• Acrylic Cabinet for machine.
• Total cGMP model.
• S.S frame structure.
• Can handle vial sizes from 5ml to 100ml with the help of Change Parts.
• “No ampoule – No Washing” system eliminates wastage of water & air.
• Easy cleaning & maintaining.
• Machine can be equipped with PLC system optionally.
• Normal water required for washing. No hot water required.

• Pneumatic Air: Filtered, oil free, sterile low-pressure Air at 5kg/cm (4/6 bar) 150 CFM.
• Water supply: 120 litre/ hour (approx.)
• Note: You can reuse the drain DM water which is used in the Vial Washing Machine.

• 1ml to 10ml vial (Dia. 10mm to 18 mm max.)
• Height: 38 mm to 160 mm

Product Details:

Automatic External Vial Washing Machine: Model AEEW 250 is designed to wash the outer surface of round shaped vials (2 ml to 30 ml vials) This machine washes the outer sides of vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.

vials external washer machine is for oncology ampoule external washer machine and aseptic processing lines, speed up to 150vpm , ampoule surfaces involves the destruction or removal of any possible product residual so as to prevent them infecting the operators and cross contamination between containers and machine, as well.

From the infeed hopper the vials are fed into the External vials Washing Machine starwheel. The machine consists of starwheel on which the vials are properly fed and transported from in feed hopper for the washing operation. Two operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the sides of the conveyor a set of spray nozzles are fitted on each conveyor for water jet. One set of knifes blocks are provided on each conveyor for air jet The air is sprayed through this knifes.

The Knifes are fitted in a inclined manner which ensures that the air that is sprayed reaches each corner of the vial which are previously washed. After washing and drying the vials are guided to the outfeed trays. Before reaching the outfeed Trays a special arrangement is provided to dry the vials from the bottom side.

A set of syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of the vial resulting in the drying of the vials. This machine is completely operated by PLC. A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water & air and shows the indication with alarm in the PLC.

Product Details:

"Automach" High Speed Linear Vial Washing Machine Model: AEVW 120/ 240 is most ideal for Round Vial and finds wide application in pharmaceutical industries. automatic linear vial washing machine to make the surfaces of vial free from any dust or foreign particles. The cleaning of vial is an important procedure in order to make it suitable for further pharmaceutical applications. Our state of the art manufacturing facilities makes us produce optimum quality washing machines for the vial.

Machine is suitable for Pharmaceuticals Industries. Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water and WFI water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure.

The automatic loading arrangement facilities loading of vials on to SS wire mesh conveyor through feed conveyor or vials are pushed manually from feed table. This saves manpower as vials are feed into pockets automatically. The automatic unloading mechanism consists of unloading vial continues on to turn table (Optional)

Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure. In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements. The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at centre of the bottle and the bottle comes out with water totally drained with minimum droplets of water.

• High-pressure spray nozzles ensure perfect wash of Bottles.
• Interchangeable wash sequences.
• Totally fabricated from SS Materials, including the basic frame.
• No change parts required for washing of round bottle saving time of change over. (Change Parts require for Flat bottles & if change of neck size.)
• All parts coming in contact with washing zones / jet are made from SS 316 materials.
• The machine suitable for handling washes of round and flat glass bottle (With help of change parts).
• Water re-cycling arrangement is possible as per customer’s need.
• Machine is totally rigid and with stands continuous operation for long working. Hours without any trouble.

Product Details:

we automach engineers provide S.S construction provides lucid operation while washing ampoules of 1ml to 25ml. additionally; the washing equipment also meets the washing demands of 2ml to 100ml vials. Microprocessor incorporation enhances the functioning of the entire unit.

Multijet Ampoule and Vial Washing Machine is a semi automatic, compact, versatile and a reliable ampoule and vial Washing machine, equipped with the latest GMP standards requirements. Multijet Ampoule & Vial Washing Machine is designed with stainless steel construction with compliance to wash ampoule size of 1ml to 20ml and glass vial sizes of 2ml to 100ml with the help of suitable change parts. The standard unit is having mechanical motorized cam operated valve system for observing total six washing in one cycle. Alternatively timer operated solenoid valve system or microprocessor controlled timer sequences can be in-corporate upon specific customer request. Multijet Ampoule & Vial Washing Machine is widely use in medium & small scale injectable organizations.

Automatic re-start and stop process during the cyclic operation further enhances your convenience while washing. Additionally, all the contact parts of the equipment exhibit S.S 316 or HDPE polycarbonate materials, thus imparting robust strength.